 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| OP284B Dual Operational Amplifier VCC OP284B TP RB1 R3 R4 QB6 QB5 RB3 RB4 R11 Q11 Q7 Q1 -IN Q3 Q4 Q2 +IN Q5 Q9 Q8 Q12 QB9 QB10 Q10 CC2 CFF R6 Q16 Q17 Flat Pack JB1 QL1 QL2 OUT CO Q6 Q18 QB2 QB3 R7 Q13 QB4 JB2 CC1 QB7 Q14 R9 QB8 R8 R10 Q15 CB1 N+ M P+ RB2 OP284B QB1 R1 R2 R5 VEE Leadless Chip Carrier (LCC) Logic Diagram Memory FEATURES: * RAD-PAK(R) radiation-hardened against natural space * radiation * Package: - 8-pin RAD-PAK(R) flat pack - 16-pin RAD-PAK(R) Leadless Chip Carrier (LCC) pack * Single-Supply Operation * Wide Bandwidth: 4 MHz * Unity-Gain Stable * High Slew Rate: 4.0 V/us * Low Noise: 3.9 nV/(Hz)1/2 DESCRIPTION: Maxwell Technologies' OP284B is a dual single-supply, 4 MHz bandwidth amplifier featuring rail-to-rail inputs and outputs. Using Maxwell Technologies' radiation-hardened RADPAK(R) technology, it is guaranteed to operate from +3 to +36 (or 1.5 to 18) volts and will function with a single supply as low as +1.5 volts. This amplifier is superb for single supply applications requiring both ac and precision dc performance. The combination of bandwidth, low noise and precision makes the OP284B useful in a wide variety of applications, including filters and instrumentation. Other applications for this amplifier include portable telecom equipment, power supply control and protection, and as an amplifier or buffer for transducers with wide output ranges. The ability to swing rail-to-rail at both the input and output enables designers to build multi-stage filters in single-supply systems and to maintain high signal-to-noise ratios. Maxwell Technologies' patented RAD-PAK(R) packaging technology incorporates radiation shielding in the microcircuit package. It eliminates the need for box shielding while providing the radiation shielding for a space mission. This product is available with screening up to Class S. 07.16.09 Rev 1 All data sheets are subject to change without notice 1 (858) 503-3300 - Fax: (858) 503-3301 - www.maxwell.com (c)2009Maxwell Technologies All rights reserved. Dual Operational Amplifier TABLE 1. FLAT PACK PINOUT DESCRIPTION PIN 1, 7 2, 6 3, 5 4 8 SYMBOL OUT A, B -IN A, B +IN A, B VV+ Outputs Negative Inputs Positive Inputs Ground Supply Voltage DESCRIPTION OP284B TABLE 2. LEADLESS CHIP CARRIER (LCC) PINOUT DESCRIPTION PIN 1, 13 3, 11 5, 9 7 15 SYMBOL OUT A, B -IN A, B +IN A, B VV+ Outputs Negative Inputs DESCRIPTION Memory Positive Inputs Ground Supply Voltage TABLE 3. OP284A ABSOLUTE MAXIMUM RATINGS PARAMETER Supply Voltage Input Voltage Differential Input Voltage1 Output Short-Circuit Duration to GND Storage Temperature Range Operating Temperature Range Junction Temperature Range Package Weight Thermal Impedance TS TA TJ -65 -40 -65 -SYMBOL VCC VI VDIF MIN ---Indefinite +150 +125 +150 0.75 6.48 C C C Grams C/W MAX 18 18 0.6 UNIT V V V JC 1. For input voltages greater than 0.6 volts, the input current should be limited to less 5 mA to prevent degradation or destruction of the input devices. TABLE 4. DELTA LIMITS PARAMETER ICC VARIATION 10% of specified value in Table 5 07.16.09 Rev 1 All data sheets are subject to change without notice 2 (c)2009 Maxwell Technologies All rights reserved. Dual Operational Amplifier TABLE 5. OP284B ELECTRICAL CHARACTERISTICS OP284B (V+ = 15V, V- = -15V, VOUT = 0V, RS = 50, RL = 100K, VCM = 0V, TA = -40C TO +125C UNLESS OTHERWISE SPECIFIED.) PARAMETER Input offset voltage Average offset voltage drift1 Offset voltage match1 Input bias current Input offset current Input bias current drift1 Input voltage range Common mode rejection ratio Output current SYMBOL VIO +25C -40 to +125C VIOTC RL=2k TEST CONDITIONS SUBGROUPS 1 2, 3 1, 2, 3 1 2, 3 1 2, 3 1 2, 3 1, 2, 3 1, 2, 3 4,5,6 4 1 2, 3 1 2, 3 1 2, 3 1 2, 3 1, 2, 3 1, 2, 3 1 1 1 1, 2, 3 4 5,6 4 5,6 ----1.80 2.25 90 90 -----VCM = -15V to +15V, TA=25C +IO -IO Quiescent power supply current/amplifier +ICC -ICC VOUT = -10V, 1ms pulse, TA=25C VOUT = -10V, 1ms pulse VOUT = +10V, 1ms pulse, TA=25C VOUT = -10V, 1ms pulse IOUT = 0mA VS=18V, TA=25C IOUT = 0mA VS=18V IOUT = 0mA VS=18V, TA=25C IOUT = 0mA VS=18V Power supply rejection ratio +PSRR VS=2V to 18V -PSRR VS=2V to 18V Low frequency, peak-topeak noise1 Input noise voltage density1 Input noise current density1 Power consumption1,2 Large signal voltage gain Enp-p En In PC 0.1Hz to 10Hz, RL=2k, CL=50pF, TA=+25C RS=20, fO=1kHz, RL=2k, CL=50pF, TA=+25C RS=20M, fO=1kHz, RL=2k, CL=50pF, TA=+25C +10V, IOUT=0mA, RL=2k +10V, RL=2.0k -AVOL -10V, RL=2.0k,TA=25C -10V, RL=2.0k -15 86 80 10 5 MIN -175 -375 --350 -575 -35 -50 TYP -----------------------0.30 3.9 0.4 MAX 175 375 2 100 200 350 575 35 50 200 15 -----10 -5 1.80 2.25 -------81 150 75 150 75 V/mV dB dB Vp-p nV/ (Hz)1/2 pA/ (Hz)1/2 mW V/mV mA mA mA nA nA nA nA pA/C V dB dB mA V/C V UNIT V VIO |VIO (max) - VIO (min)|, +25C |VIO (max) - VIO (min)|, -40 to +125C IB IOS IIBTC IVR CMRR VCM = -14V to +14V RS = 50, +25C RS = 50, -40 to +125C RS =50, +25C RS = 50, -40 to +125C RS = 50 Memory +AVOL +10V, RL=2.0k,TA=25C 07.16.09 Rev 1 All data sheets are subject to change without notice 3 (c)2009 Maxwell Technologies All rights reserved. Dual Operational Amplifier TABLE 5. OP284B ELECTRICAL CHARACTERISTICS OP284B SUBGROUPS 4,5,6 4,5,6 4 4 9 4 4,5,6 4,5,6 MIN 14.8 -----2.4 2.4 TYP --4.25 35 --4.0 4.0 MAX --14.8 --5 50 --UNIT V V MHz kHz s Degrees V/ s V/ s (V+ = 15V, V- = -15V, VOUT = 0V, RS = 50, RL = 100K, VCM = 0V, TA = -40C TO +125C UNLESS OTHERWISE SPECIFIED.) PARAMETER Output voltage swing Gain bandwidth product1 Full power bandwidth1,3 Settling time Phase margin Slew rate SYMBOL +VOUT1 IL=1.0mA -VOUT1 IL=1.0mA GBWP VO=200mV, RL=2.0k, CL=50pF, TA=+25C FPBW VPEAK=29vp-p, RL=2.0k, CL=50pF, TA=+25C, 1% distortion tS FO +SR -SR 1. Guaranteed by design. 2. Power consumption is based upon quiescent supply current maximum test limit. No load on outputs. 3. Full power bandwidth is based on slew rate measurement using FBBW = slew rate/(2PVPEAK). AV=+1.0, CL=50pF, RL=2.0k To 0.01%, 10V step AV=1.0, CL=50pF, RL=2.0k, TA=+25C CL=50pF, RL=2.0k CL=50pF, RL=2.0k TEST CONDITIONS Memory 07.16.09 Rev 1 All data sheets are subject to change without notice 4 (c)2009 Maxwell Technologies All rights reserved. Dual Operational Amplifier OP284B Memory 8-PIN RAD-PAK(R) FLAT PACKAGE SYMBOL MIN A b c D E E1 E2 E3 e L Q S1 N 0.338 0.021 0.005 0.119 0.010 0.004 0.250 0.250 -0.125 0.030 DIMENSION NOM 0.132 0.017 0.005 0.255 0.255 -0.145 0.040 0.050 BSC 0.348 0.025 0.019 8 0.358 0.045 -MAX 0.149 0.022 0.009 0.260 0.260 0.290 --- F8-01 Note: All dimensions in inches 07.16.09 Rev 1 All data sheets are subject to change without notice 5 (c)2009 Maxwell Technologies All rights reserved. Dual Operational Amplifier OP284B 16-PIN RAD-PAK(R) LCC PACKAGE SYMBOL MIN A b D D1 S1 e A1 N 0.095 0.123 0.018 0.245 DIMENSION NOM 0.135 0.020 0.250 0.150 BSC 0.050 BSC 0.050 BSC 0.105 16 0.116 MAX 0.150 0.025 0.260 Memory LC16-01 Note: All dimensions in inches. 07.16.09 Rev 1 All data sheets are subject to change without notice 6 (c)2009 Maxwell Technologies All rights reserved. Dual Operational Amplifier Important Notice: OP284B These data sheets are created using the chip manufacturer's published specifications. Maxwell Technologies verifies functionality by testing key parameters either by 100% testing, sample testing or characterization. The specifications presented within these data sheets represent the latest and most accurate information available to date. However, these specifications are subject to change without notice and Maxwell Technologies assumes no responsibility for the use of this information. Maxwell Technologies' products are not authorized for use as critical components in life support devices or systems without express written approval from Maxwell Technologies. Any claim against Maxwell Technologies must be made within 90 days from the date of shipment from Maxwell Technologies. Maxwell Technologies' liability shall be limited to replacement of defective parts. Memory 07.16.09 Rev 1 All data sheets are subject to change without notice 7 (c)2009 Maxwell Technologies All rights reserved. Dual Operational Amplifier Product Ordering Options Model Number OP284B RP F X Feature OP284B Option Details Screening Flow Monolithic S = Maxwell Class S B = Maxwell Class B I = Industrial (testing @ -40C, +25C, +125C) E = Engineering (testing @ +25C) Memory Package F = Flat Pack L = Leadless Chip Carrier (LLC) Radiation Feature RP = RAD-PAK(R) package Base Product Nomenclature Operational Amplifier 07.16.09 Rev 1 All data sheets are subject to change without notice 8 (c)2009 Maxwell Technologies All rights reserved. |
Price & Availability of OP284BRPLB
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |